Remote Control Codes For NAXA TVs

Naxa TV Universal remote code is used to program your tv with any universal remote. use the listed universal remote codes start with 4 digit codes. Use below universal remote codes to program Naxa TV. follow the programming instruction described.

NAXA TV 5 Digit Remote Control Codes
12104
11998
24965
(There are no “official” universal remote codes for NAXA TVs,
these 5 digit codes have been shown to work on most NAXA model number televisions)

NAXA TV 3 Digit Remote Control Codes
Try the 9-2-2 auto search method
(Depending on remote and component used – See below for 9-2-2 method)

How to auto search on your remote control with the 9-2-2 method:

  • Turn on your NAXA TV.

  • Point your remote control at the TV.

  • Search the remote control memory for the 3, 4, or 5 digit code.

  • Press and hold the TV button.

  • Simultaneously hold the OK key.

  • All keys should flash twice.

  • Enter “922” and the selected mode key should flash twice.

  • Press and hold the POWER button.

  • Wait for the TV to turn off before you release POWER.

  • Use the REW button to look through each code backwards one at a time.

  • Use the FF button to look through each code forwards one at a time.

  • POWER or PLAY button will continue the auto search of the remote codes.

  • Press ENTER when you find the correct code.

  • The TV key will flash 3 times.

  • The Mode buttons will blink RED if it does not find a valid code.

  • If you do not find the TV code – repeat the steps.

(This is for use with an ATT UVERSE Remote but will work with other remotes using related buttons)

Recent content