Universal Remote Codes

How to Program a Universal Remote using Universal Remote Codes

Universal remote controls can be programmed to be used with multiple devices like TV, Blu-Ray and AV Receivers, you can ditch several different remote controls  for one Universal remote. Universal remote can control all home theater devices and components. Universal remote allows you to set aside the individual device remotes for one Universal remote. With a universal remote you can start using it by first programming the remote with each individual device in the home theater arsenal. 

Sony TV Universal setup

Universal Remote Codes By TV Brand

Universal remote codes
Samsung TVs Sharp TVs Onn
ROKU TVs LG TVs BlackWeb
Comcast Generic TVs Emerson
SONY TVs Jumbo Proscan TV
Element TV Sceptre TV Sanyo TV
One For All Hisense TVs FireTV
Hitachi TVs Supersonic TVs Haier TVs
Avera TVs RCA TVs Auria TVs
Dynex TVs SONIQ TVs Union TVs
Upstar TVs JVC TVs Kogan TVs
TCL TVs Durabrand TVs Promac TVs
Philips TVs COBY TVs Matrix TVs
Panasonic TVs oCosmo TVs FUNAI TVs
Toshiba TVs Mitsubishi TVs APEX TVs
Vizio TVs Sylvania TVs Skyworth TVs
Magnavox TVs Goldstar TVs LOGIK TVs
Westinghouse TVs Devant TVs Daewoo TVs
Cox Craig TVs Symphonic TVs
INSIGNIA TVs Sansui TVs Senzu TVs
Aiwa TVs ILO TVs Axess TVs
AOC TVs XENON TVs Zenos Powerful TVs
NAXA TVs Telefunken TVs OLEVIA TVs
Spectrum Charter Zenith
Grundig TVs Hyundai TVs Bose


Universal Remote Codes manual setup and Instructions

Universal Remote Codes

Before starting, make sure you have hooked up all the cables and powered on the devices and components. then, make sure batteries are working in the remote.

Programming Philips Universal Remote

Step 1. Enter device into setup mode

Locate SETUP button on universal remote control, Press and hold the setup button till you see red light is on. then stop holding the setup button. now remote is in setup mode.

Step 2. Select the device type as TV

Quickly press and release the TV button you want to setup.

Step 3. key the universal remote code corresponding to your device from below list.

Use the number keypad to enter universal remote code, Now red light will turn off.

Step 4. Verifying the results.

Point Universal remote in the direction of the device and try to turn on and off the device. if the device responds your all set.  otherwise repeat the steps using next four digit code from below list.

Step 5. Setting up other device.

repeat the above steps to setup more devices.


Universal Remote codes list with Instructions

If your looking for universal remote codes look no further, we got almost all remote brands with 3 digit and 4 digit remote codes from Samsung to Logitech.

Sound Bar Remote Codes

Klipsch Insignia Philips
Pyle BOSE Sanyo
Denon Comcast RCA
JBL SONY Samsung
Sylvania Yamaha Vizio
Sceptre LG  All Soundbars




Recent content