Universal Remote Codes for Sanyo TV

What is Sanyo TV Universal remote codes? These are unique combinations designed to work with a Sanyo TV brand and type of device. There are countless codes available, and they are provided on this page for your convenience. Prior to programming, it's highly recommended that you browse through the list of codes and note down those that correspond to your SanyoTV. This will make it easier for you to provide the correct code when prompted during the procedure.

Who wouldn't want the convenience of operating all their entertainment devices with Sanyo remote? It's hard to imagine anyone who would not like it. If you're looking for a solution to achieve a seamless experience, you've come to the right place. The key to making this possible is Sanyo Remote programming. With Sanyo Remote programming, you can now store your other remote controls away on a shelf. So, how does this programming work? All you need is your remote, device, and most importantly, the codes.

Universal Remote Codes for Sanyo TV

  • 0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180.

Using the code(s) provided above, program the remote control directly using the following steps.

Sanyo TV Programming Instructions with code

  1.  Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  2.  Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.
  3.  Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device Button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.
  4.  Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.
  5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.
  6. If your device does not respond to the first code listed, If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by  following the steps below.

Sanyo TV Programming Instructions with out codes

  1. Turn on the device you wish to program.
  2. LIGHT lights, then release. Press and hold CODE SEARCH/SETUP until the INDICATOR
  3. Programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device
  4. Button you are assigning to AUX. Press and release the device button for the device you are
  5. wait 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times. Press and release POWER until your device turns off. Wait at least
  6. Then, INDICATOR LIGHT will go off.
  7. When your device turns off press the ENTER/SAVE button. The SLEEP FEATURE (RM94902, RM94904 and RM94905) This feature will turn off your TV at the time you choose from 1-99 minutes

Sanyo TV Remote Programming and Remote

How to Setup Sleep Feature on Sanyo TV

  1.  Press and hold the SLEEP button until the INDICATOR LIGHT stays lit.

  2.  Enter time in minutes using the numerical keypad. (Minutes 1-99;press 0 before the actual number).
  3.  Lease remote aimed at television. The Sleep Function will not function properly unless the remote is left aimed at the television

How to Turn Off the Sleep Feature: 

Press and hold SLEEP until the INDICATOR LIGHT blinks or press the

POWER button to turn off the TV.

Sanyo Remote Codes ( for TV )

  • 0049, 0097, 0110, 0004, 0268, 0012, 0108, 0180.

Sanyo DVD Blu-Ray Remote codes

  • 0904, 0416

Sanyo DVD-Recorders + RW Remote code

  • 0904

Sanyo VCR Remote Codes

  • 0304 0267 0268 0354 0248

Sanyo TV/VCR Combo Remote Code

  • 0268

Sanyo DVD/VCR Combo codes

  • 0416, 0267

Note: Where the code is listed as code1, code2, the first 0416 is for the DVD and the second 0267 is for the VCR. Otherwise just one code operates both the DVD and the VCR.

Sanyo Laser Disc Remote Code

  • 0232

How to Fix Sanyo Remote that is Not working

  • There are several reasons why the codes may not work initially. However, this is completely normal and is precisely why multiple codes are provided.
  • If the first code doesn't work, you can simply try another one. Keep in mind that this may take a few minutes, and you may need to repeat the steps.
  • Another factor that can affect the performance of your remote is the condition of the batteries. Deteriorating batteries can cause the remote to malfunction and prevent it from responding to commands. Be sure to use new batteries for optimal performance.
  • Lastly, it's possible that objects in the room may be blocking your TV and preventing it from detecting any commands from the remote. Ensure that there are no obstructions in front of your device to avoid this issue

This guide has covered the steps needed to pair your Sanyo Universal remote with your TV, and has provided a list of codes that you can use to program the Sanyo Universal remote with your TV instantly. If you have any questions or concerns, please do not hesitate to leave them in the comments section below.

Recent content